morpho-mso-l1-rd-service-guide.webp

RD Service Activation & Driver Installation for Morpho MSO 1300 E3: Complete Step-by-Step Guide

Biometrics has already entered into a critical border of digital identity verification in India, notably at services such as Aadhaar, banking, and government welfare programs. One of the most popular biometric devices is the Morpho MSO 1300 E3 which represents a fingerprint scanner that can be characterized by its reliability, speed, and accuracy. Nevertheless, to utilise it effectively, the Registered Device (RD) Service must be enabled and the appropriate driver software must be installed depending on your system.


This step-by-step guide will tell you how to install your Morpho MSO 1300 E3 driver in Windows and Android operating systems. This blog contains everything you need to know whether you are a starting technician or an experienced practitioner.


Why RD Service Activation Is Important for  Morpho MSO 1300 E3

Under the UIDAI (Unique Identification Authority of India), the Indian government has made it a requirement that every biometric product used in the implementation of the Aadhaar based authentication services adheres to the Registered Device (RD) Framework. Such compliance provides restriction and standardization in transmission of biometric information in Aadhaar-based transactions. In order to fit these regulations, each device using RD periscope must:


To make sure your biometric device meets UIDAI standards, you need to enable the RD Service. Without this, the device won’t work with applications like Aadhaar Authentication, eKYC, eSign, Aadhaar Pay, and Jeevan Pramaan.

👉 To activate RD Service, click here

✅ To check your RD validity status, visit here


Make sure to keep your device RD-active to get secure and seamless Aadhaar-based services.


Step-by-Step Guide: RD Service Activation for Morpho MSO 1300 E3

Step 1: Buy Device from Authorized Seller

Make sure that your Morpho MSO 1300 E3 equipment is obtained only through an OEM partner such as Radium Box or you could purchase as well through rdservice.in. Only authentic and whitelisted devices can configure RD service activation.


Step 2: Note Your Device Serial Number

The serial number is located on the back of the device or the package. This will be necessary to enable the RD service.


Step 3: Visit RDService Registration Portal

Go to the rdservice.in official website or their authorized distributor’s portal like Radium Box for Rd Registration. Fill in the activation form with:


Step 4: Make Payment for RD Service

Do the payment through QR or Company details provided by, and save the receipt. You can choose the year of RD Activation according to your need.


Step 5: Receive Activation Confirmation

A confirmation will be sent either by email or SMS after that processing. Your device is now RD compliant and can now install a driver.


How to Install Morpho MSO 1300 E3 Drivers on Windows

Step 1: Download the Driver

Visit official rdservice.in driver page and Download the driver according to your windows version (Windows 7/8/10/11).


Step 2: Run the Installer


Step 3: Connect the Device

Connect the scanner via USB. Allow some time to wait until Windows identifies and installs the device.


Step 4: Test the Device

To check, use Morpho Test Utility Software (also downloadable).

In case all functionality is operational, then your installation is successful.


How to Install Morpho MSO 1300 E3 on Android

Step 1: Download Morpho RD Android App

Visit Google Play Store or extract the APK from here.


Step 2: Allow App Installation from Unknown Sources

In case of APK installation, do enable the permission of "Install Unknown Apps".


Step 3: Connect the Device via OTG

Connect the Morpho MSO 1300 E3 with your Android smartphone or tablets using an OTG cable.


Step 4: Launch the RD App

It will auto-detect the device once launched. It is successfully set up and confirmed by a message that appears on the phone: Device RD Service Activated.


Common Issues & Troubleshooting

Problem 1: RD Service Not Activated
Solution: Make sure that your device is registered. Contact our customer care support team at +91 97026 84343 or email us at [email protected].


Problem 2: Failed to Install Driver on Windows
Solution: Open installer with Administrator rights and turn off antivirus in case.


Problem 3: No Device Detected on Android
Solution: Check The compatibility of OTG and quality of cables. Ensure that your Android version is 7.0 and above.


Use Cases of Morpho MSO 1300 E3 with RD Service


Conclusion

It is important to activate RD Service and install the right drivers to have safe and efficient use of your Morpho MSO 1300 E3 fingerprint scanner. Regardless of applications such as Aadhaar authentication, bank services or e-governance platforms, an adequately configured device guarantees compliance, security, and reliability. When looking to purchase your morpho l1 device, make sure to get it from an authorized seller and ensure the purchased device is implemented and consider the given steps to have a smooth, secure biometric experience.

To download easily, get support and activation assistance, you can visit rdservice.in which is your trusted partner in biometric and digital authentication.

Frequently Asked Questions

Is RD Service activation mandatory?
Yes, UIDAI, ensures RD Service is activated on all Aadhaar-based biometric devices.
How long does the RD Service remain active?
This varies depending on the plan you buy; usually 1 year to 3 years. Click here for RD Recharge.
Can I activate the same device on multiple systems?
Yes, after RD Service is enabled, a driver can be installed in multiple devices supported.
What is the cost of Morpho RD Service activation?
It is dependent on each vendor, but in most of the cases, you will find it at the cheapest usually rdservice.in you will get at the lowest price and can choose RD Service year accordingly 1 to 3 years.
Can I use Morpho MSO 1300 E3 for banking purposes?
It has been broadly accepted in Aadhaar Pay, eKYC schemes and DBT schemes.

Talk to us?